Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the rear pillar trim. See chapter Body.
2. Disconnect the connector from the rear combination light.
3. Remove the mounting bolts (A) of the rear combination light.
4. Slide the rear combination light (1) towards the rear of the vehicle and remove it from the vehicle.
5. While pressing the latches (A) in the direction shown in the illustration, remove the rear combination light trim (2) from the rear combination light housing (1).
Installation
Installation is performed in the reverse order of removal.
Rear combination light fastening nut: Tightening torque: 5.5 N·m (0.56 kg·m)