1. Facing the front pillar; 2. Front curb body side panel; 3. Side trim of the dashboard bulkhead; 4. Rear shelf holder for small luggage; 5. Lower lining of the central pillar; 6. Facing the rear pillar; 7. Rear curb of the body side panel; 8. Upper lining of the central pillar; 9. Plank
Removing
Body side panel front curb
Remove the front curb of the body side panel from the vehicle.
Dashboard bulkhead side trim
1. Remove the body side panel front curb from the vehicle.
2. Remove the side trim of the dashboard bulkhead.
Facing of a forward rack
1. Partially remove the front curb of the body side panel.
2. Unfasten the fixing clips, press on the A-pillar trim from inside the passenger compartment and remove it.
B-pillar lower trim
1. Partially remove the front and rear curbs of the body side panel.
2. Separate the section inserted into the flange of the B-pillar, first remove the front side, then the rear side in the same way.
B-pillar top trim
1. Partially remove the front and rear curbs of the body side panel.
2. Remove the lower facing of the central rack.
3. Remove the front seat shoulder belt anchor. See chapter «Seat belts».
4. Press on the upper trim of the B-pillar from inside the passenger compartment, disengage the clips as shown in the figure, and remove the trim of the A-pillar.
C-pillar trim
1. Partially remove the rear curb of the body side panel.
2. Remove the side trim of the luggage compartment. See section «Side trim luggage compartment».
3. Remove the top fastening of a seat belt of a back seat.
4. Unhook clips and remove facing of a back rack.
Installation
Installation is carried out in the reverse order of removal.