Table of contents: Removal ↓ Installation ↓
1. Front door exterior molding; 2. Rear side door exterior molding; 3. Front wing trim; 4. Rubber bushing
Removal
1. Lower the door windows completely.
2. Grasp the end of the outer door molding with your fingers and pull to release the plastic clips from the outer door panel. If there is a risk of deformation of the outer door molding, insert a clip remover between the outer door panel and the end of the outer molding (see fig.).
3. Pull up and remove the outer door molding from the outer door panel.
Caution: After removal, visually inspect the molding and, if it is deformed, replace it with a new one.
Installation
Installation is performed in the reverse order of removal.