Removing
1. Remove the rear window wiper arm from the vehicle. See section «Removal and installation of the rear window wiper lever, adjusting the stop position of the wiper lever».
2. Remove the seal from the axle.
3. Remove finishing of a back door. See chapter BODY.
4. Disconnect the connector from the rear window wiper motor.
5. Unscrew the fixing bolts (A) rear window wiper motor and remove the wiper motor (1) from the car.
Installation
Caution: Do not drop the rear window wiper motor or strike it against other parts.
1. Install the seal on the axle.
2. Install the rear window wiper motor on the vehicle.
Rear wiper motor mounting bolts: Tightening torque: 5.0 Nm (0.50 kg m)
3. Connect the connector to the rear window wiper motor. Turn on the engine with the purifier switch and then turn it off (hitch-hiking).
4. Install tailgate trim. See chapter BODY.
5. Install the wiper arm on the vehicle and replace the cap.