Left hand drive
1. Wiper arm and brush assembly (right); 2. Mounting bolts of the windshield wiper drive assembly; 3. Windshield wiper drive assembly; 4. Wiper arm and brush assembly (left); 5. Fixing nuts of the cleaner lever; 6. Wiper lever caps
Right hand drive
1. Caps of levers of cleaners; 2. Fastening nuts of the cleaner lever; 3. Wiper arm and brush assembly (right); 4. Fastening bolts of a drive of cleaners of a windshield in gathering; 5. Windshield wiper drive assembly; 6. Wiper arm and brush assembly (left)
Removing
1. Turn on the windshield wiper motor and then turn it off in the auto stop position.
2. Remove the wiper arms. See section «Withdrawal».
3. Remove the hood grill cover. See chapter Body.
4. Disconnect the connector from the wiper motor and remove the connector clips.
5. Unscrew the fixing bolts (A) windshield wiper drive assembly and remove the drive (1) from the car.
Installation
1. Install the windshield wiper drive assembly to the vehicle.
Windshield wiper drive mounting bolts assy: Tightening torque: 4.5 Nm (0.46 kg m).
2. Connect the connector to the wiper motor Turn on the motor with the wiper switch and then turn it off (hitch-hiking).
3. Place the connector clips on the cleaner frame and install the hood grille cover. See chapter Body.
4. Install wiper arms. See section «Installation».
5. Adjust the stop position of the wiper arms.
6. Place the caps on the wiper arms.