2. Remove the converter shield (photo).
3. Secure the neutralizer with wire
4. Remove shields and disconnect pipe bracket.
5. Loosen the two bolts securing the pipe to the neutralizer.
6. Turn away bolts of fastening of a pipe to a collector. Turn out bolts of fastening to neutralizer and remove a pipe.
7. Installation is carried out in the reverse order. Replace gaskets, lubricate bolts with anti-seize compound.
20.2 Exhaust system of injection engines
1. Front pipe A; 2. Front pipe C; 3. Tube selection of exhaust gases; 4. Converter; 5. Middle section; 6. Silencer; 7. Front pipe B; 8. For all-wheel drive vehicles; 9. For rear wheel drive vehicles