Adjusting the fit
Adjusting gaps front/rear and right/left (front and back covers)
Preparatory work
Remove the side trim.
1. Loosen the glass cover mounting nuts.
2. Adjust the position of the glass cover at sections A-A to FF as shown in the figure.
3. After adjusting the position of the glass lid, make sure that it moves freely.
Level adjustment
Adjust the level of the glass cover surface with the roof panel by changing the number of adjusting washers between the glass cover and the levers (standard quantity: 1, maximum: 3).
(Information copied from the portal: www.NissanBook.ru)
If the glass cover protrudes above the roof, adjust the level by installing adjusting washers or flat washers on the mounting bracket or on the sunroof assembly studs.
After adjusting the fit, hose down the entire roof surface and check for leaks.
