Radiator
1. Expansion tank; 2. Holder; 3. Lid; 4. Bracket; 5. Upper radiator hose; 6. Gasket; 7. Outlet plug; 8. Rubber mount; 9. Oil radiator hose (not available in all versions); 10. Radiator; 11. Lower radiator hose; 12. Fan; 13. Fan motor; 14. Fan shroud
Cooling pump
1. Cooling system pump; 2. Water pump belt pulley; 3. Flange to thermostat (before assembly, coat with liquid sealant such as Loctite); 4. Flange to the cylinder block (before assembly, coat with liquid sealant such as Loctite); 5. Belt pulley flange
| Cooling system capacity | 7.1 l |
| Position of the vent and drain plugs on a diesel engine: | |
| - drain plug on the engine | front left, 70 Nm |
| - ventilation plug | left front on the intake manifold |
| Diesel engine thermostat | |
| Warning: The start may vary depending on the thermostat type. | |
| Start of opening | 88°C |
| End of opening | 100°C |
| Thermal switch | |
| Thermal switch installation location | in the coolant pipe to which the lower radiator hose is connected (although, for different modifications, options are possible) |
| Temperature of the switch on | 90°C |
| Temperature of switch off | 88°C |