Table of contents: Removal ↓ Installation ↓
Removal
1. Turn the fog light switch to the "OFF" position.
2. To increase the working space between the wing guard and the wing, fold back the wing guard and engine guard from the bottom.
3. Press the latch (A) and remove the trim (1) from the front bumper.
4. Disconnect the connector from the fog light.
5. Loosen the screw (3) and remove the fog light (2) from the bracket.
[The article is located on the website nissanbook]
Installation
Installation is performed in the reverse order of removal.
Tightening torque: 5.5 Nm (0.56 kg·m)