Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the interior mirror. See chapter Body.
2. Remove the clamp and press the latches.
3. Remove the light and rain sensor.
4. Disconnect the connector from the light and rain sensor.
Caution: Do not touch the electronic circuit board on the rain sensor.
Installation
Installation is performed in the reverse order of removal.
Installing the light and rain sensor housing
Caution: When replacing the windshield, always replace the rain sensor housing.
1. Clean the surface to be glued on the windshield.
2. Insert the rain sensor housing into the bracket from the top, then press it downwards until it is completely seated.
Caution: Do not touch the glue.