1. Block IPDM E/R E8, E11, E12.
2. Block VSM M57, M59 (view with the upper part of the dashboard removed).
3. Combined switch M38.
4. Instrument cluster M27.
5. Daylight relay E54
Standard voltage values on the contacts of the VSM block
Attention:
- Check the waveform at the combination switch terminals under power with the headlight switch, turn signal switch and wiper switch off so as to avoid oscillation from overload.
- Turn the wiper dial to position «4», except for the case of checking the waveform or voltage at a certain position on the wiper scale. The position of the wiper scale can be confirmed with the CONSULT-II tester.