Examination
Check the resistance (at normal room temperature) between contacts 1 and 2 of the TDC sensor.
- Resistance: 550±55Σ
Removal
1. Remove the left engine guard from the bottom.
2. Disconnect the electrical wiring connector.
3. Remove the TDC sensor.
Attention:
Do not hit the sensor.
Keep the sensor away from iron filings.
Do not expose the sensor to magnetic fields.
Installation instructions
Tighten the bolt, pressing the TDC sensor sleeve against the arc-shaped recess in the upper pan.
The article was obtained from the portal: nissanbook