Quantity check
1. Check the oil level through the filler hole as shown.
2. Apply sealant 1215 (KR61000 250) on the filler plug. Screw the plug into the transfer case and tighten to the required torque.
Filler plug:
: 10-19 N-m (1.0-2.0 kgm)
Replacement
Replacement Interval: For personal and commercial use: after overhaul.
Drain
1. Drive the vehicle and warm up the transfer case to normal operating temperature.
2. Stop the engine, remove the drain plug and drain the oil from the transfer case.
3. Apply sealant 1215 (KR61000 250) on the drain plug. Screw the plug into the drain hole and tighten to the required torque.
Drain plug:
: 10-19 N-m (1.0-2.0 kg m)
Refueling
1. Remove the plug from the filler hole and fill in Nissan Differential Gear Hipoid Oil Super GL-5 80W-90 transmission oil until it reaches the specified level at the filler hole.
- Filling capacity: approx. 0.31 l
Caution: Fill oil slowly (for approx. 3 minutes).
2. Wait at least 3 minutes and recheck the oil level.
3. Apply sealant 1215 (KR61000 250) on the filler plug. Screw the plug into the transfer case and tighten to the required torque.
Filler plug:
: 10-19 N-m (1.0-2.0 kg m)