Note: Make sure that the brake fluid reservoir is not empty. When working with brake fluid, take precautions - the liquid is poisonous!
1. Fill the reservoir with fresh brake fluid.
2. Remove the rubber cap and connect the transparent hose to the clutch bleed nipple.
3. Raise the pin on the tube side one step.
Note: Do not remove the pin completely.
4. Slowly fully depress and release the clutch pedal 15 times at intervals of 2-3 seconds. Hold the pedal to prevent the tube on the bleed nipple from loosening when pressure is applied to it.
5. Move the tube 5 mm in the direction indicated by the arrow and drain the liquid.
6. Return the tube to its original position.
7. Release the clutch pedal and wait 5 seconds.
8. Repeat steps 4 through 7 until there are no more air bubbles in the escaping liquid.
The article is located on the website: www.nissanbook.ru