Note: Adjustment of the clutch pedal is described in Section Checking the brake system and clutch; The adjustment data is given in Specifications.
1. Remove the instrument panel trim piece under the steering column (see Chapter Body).
2. Remove the master cylinder rod tip retainer and disconnect it from the clutch pedal.
3. Remove the clutch pedal position sensor wiring harness holder from the clutch pedal bracket.
[The text is published on the website: nissanbook.ru]
4. Disconnect the clutch pedal position sensor connector.
5. Remove the 3 nuts and remove the clutch pedal assembly.
6. Installation is carried out in reverse order.