Removing
1. Remove the tailgate trim. See section «Exterior finish».
2. Disconnect sockets from a back door and take out clips of an electroconducting.
3. Secure the rear door lock with suitable material to prevent it from falling out. Using a screwdriver, etc. disengage the rear door pillar hooks (gas-filled rack) on the door side and remove the strut from the ball joint.
4. Turn off fixing bolts of the hinge on a back door and remove a back door in gathering.
Installation
Installation is carried out in the reverse order of removal.
Examination
1. Check the hinges and make sure:
- whether they make an unusual noise and whether the effort is normal when closing and opening the door;
- whether there is any wear or damage to the components
2. Apply body grease to the rotating section of the pivot.