Table of contents: Removal ↓ Installation ↓
1. Rear door panel; 2. Rear door seal; 3. Roof panel
Removal
Pull the seal and disengage it from the body at the joint area.
Caution: Do not stretch the seal after removal.
Installation
Installation is performed in the reverse order of removal.
Starting from the top section, align the mark on the seal with the center mark on the vehicle and install the seal on the vehicle.
On the bottom section, align the seal seam with the center of the latch loop.
After installation, gently pull the seal to ensure there are no areas where the seal is not tight.
Make sure the seal fits snugly around the corners and against the rear luggage compartment trim.