Description
The procedure is an operation of learning the accelerator pedal released position by monitoring the output signal of the accelerator pedal position sensor. This must be done each time the connector is disconnected from the accelerator pedal position sensor or the ECM.
Execution procedure
1. Make sure the accelerator pedal is fully released.
2. Turn the ignition key to position «ON» and wait at least 2 seconds.
3. Turn the ignition key to position «OFF» and wait at least 10 seconds.
4. Turn the ignition key to position «ON» and wait at least 2 seconds.
5. Turn the ignition key to position «OFF» and wait at least 10 seconds.