Components of the gearshift drive installation
1. Remove the center console and shift lever cover (see chapter Body).
2. Turn out bolts of fastening of assembly of the lever of a gear change.
3. Pressing the release buttons, disconnect the cables from the manual transmission and the gear lever assembly.
4. Remove cables from bracket 1.
5. Remove the central silencer and heat shield.
6. Remove bracket 2 from the vehicle.
7. Remove forward and back holders of assembly of the lever of a gear change and remove it together with cables from the car.
8. If necessary, remove the shift knob by pulling it up.
Once the handle has been removed, it cannot be reinstalled.
9. Installation is carried out in the reverse order.
10. Make sure that the gearshift mechanism works properly: all gears must be switched on clearly.