Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the lower instrument panel trim. See Chapter Body.
2. Remove the console box assembly. See chapter Body.
3. Loosen the mounting nuts (A), remove the wiring clamps (B) and remove the instrument panel pillar (1).
4. Loosen the mounting screws (A) and remove the mixing flap motor (1).
5. Disconnect the connector from the mixing flap motor.
Installation
Installation is generally performed in the reverse order of removal.
Note: After installing the throttle motor, reset it to its original position by following Step 3 of the self-diagnosis.
[The material is taken from a web resource: NISSANBOOK.ru]