Table of contents: Front doors ↓ Rear side doors ↓
 |
 |
1. Front wing
2. Front door
3. Rear side door
4. Outer body panel
Front doors
Longitudinal clearance adjustment and front depth adjustment
1. Remove the front fender.
2. Loosen the hinge mounting bolts on the body side. Raise or lower the rear end of the front door to make the adjustment.
Rear side doors
Longitudinal clearance adjustment and front depth adjustment
[The original is available on the web page: NissanBook]
1. Remove the upper and lower trim from the center pillar. See section "Exterior finishing".
2. Loosen the mounting nuts from the inside and outside of the vehicle. Open the rear side door. Raise or lower the rear end of the door to make the adjustment.
Adjusting the door latch hinge
Adjust the hinge so that it is parallel to the direction of engagement of the door latch.
