Attention! The procedure for changing the oil in the front and rear gearboxes is the same.
1. Drive a few kilometers, raise the vehicle and put it on stands.
2. Prepare the accessories, place the drip tray.
3. Loosen the drain plug.
4. Carefully remove the plug.
5. Drain the oil into the sump.
6. Check with your finger for metal particles on the bottom of the crankcase. The presence of particles indicates wear on the gearbox parts and the need for repair. Clean and tighten the drain plug.
7. Turn away a stopper of a control aperture and fill in oil up to the bottom edge of a control aperture.
8. Replace the check hole plug.