Removing
Attention.
- Before starting work, turn off the ignition, disconnect both battery terminals and wait at least three minutes
- Work away from the airbag module, not directly in front of it.
- Do not use pneumatic or electric tools.
1. Remove the glove box assembly.
2. Remove the lower auxiliary panel.
3. Disconnect the front passenger airbag module wire connectors and the wiring tie.
4. To turn away bolts of fastening of the module of an airbag of the forward passenger.
5. Detach the rear clips first (IN), by turning the airbag module forward. Then, when the rear of the airbag module can be pulled down, release the clips (A).
The white arrow points towards the rear of the car
Installation
Installation is made in an order, the return to removal.
Attention.
- Be careful not to damage the wires during installation.
- If the airbag malfunction indicator on the instrument panel lights up, it is necessary to erase the fault codes from the memory of the self-diagnosis system using the CONSULT-UI tool. If the indicator is still on, perform a system self-diagnostic procedure to identify the problem.