Table of contents: Results of automatic transmission…↓ Table of standard faults ↓
1. Check the engine oil level. Top up if necessary.
2. Drive the car for ten minutes to warm up the automatic transmission fluid to a temperature of 50-80°C. Check the automatic transmission fluid level and top up if necessary.
3. Securely tighten the parking brake to prevent the wheels from turning. Install a tachometer that can be viewed from the driver's seat during the test.
4. Start the engine, press the foot brake pedal and move the selector lever to position "D".
5. Gradually press the accelerator pedal while keeping the brake pedal pressed.
6. Quickly read the parking speed value of the automatic transmission, then immediately remove your foot from the accelerator pedal.
Caution: Do not hold the accelerator pedal down for more than five seconds during the test.
Note: Automatic transmission parking speed: 2440-2740 rpm.
7. Move the selector lever to the "N" position.
8. Allow the automatic transmission fluid to cool with the engine idling for one minute.
9. Repeat steps 5 through 8, moving the selector lever to position "R".
Results of automatic transmission parking speed test
Note.
- A: The parking speed is within the permissible limits for this mode.
- H: Parking speed is higher than the permissible value.
- L: Parking speed is below the permissible value.
Table of standard faults
