Preparatory work
Remove the sliding door trim.
Remove the protective screen.
Note: If the screen is to be reused, do not cut off its butyl tape.
Remove the power window and glass.
Remove the glass guide.
Remote control unit (DU)
Disconnect the drive connector.
Unscrew the bolts of the remote control unit.
Loosen the drive screws.
Disconnect the cable clamp and remove the remote control assembly.
Lock and automatic closing unit
Loosen the fixing screws.
Disconnect the automatic closing unit connector.
Through the working opening of the door panel, remove the unit together with the electric motor.
External handle
Loosen the fixing screws and remove the handle.