Brake Line Routing Diagram
1. Drain the brake fluid (see section Replacing brake fluid and bleeding the brake system).
2. At the rear of the vehicle, use a spanner to loosen the nuts securing the tubes and disconnect the tubes from the hoses.
3. Loosen the brake caliper mounting bolts and disconnect the brake hose from the caliper by unscrewing the hollow bolt.
4. Remove the retaining plates and remove the brake hose.
5. At the rear of the vehicle, disconnect the hoses from the tubes, remove the retaining plates and remove the hoses.
6. Installation is carried out in the reverse order. Tighten the fasteners with the required force. After installation, bleed the brakes (see section Replacing brake fluid and bleeding the brake system).