1. Jack up the car and remove the corresponding wheel.
2. Drain the brake fluid (see section Replacing brake fluid and bleeding the brake system).
3. Unscrew the hollow bolt and the anchor bracket mounting bolts.
4. Remove the brake mechanism from the disc.
5. If it is necessary to remove the brake disc, unscrew its mounting screws.
6. Installation is carried out in the reverse order. Tighten the fasteners with the required force.
7. After installation, fill and bleed the brake system (see section Replacing brake fluid and bleeding the brake system).
(Original publication on the portal: «NissanBook.ru»)