Note. Subframe installation components are shown in the illustration Front suspension.
1. Remove the stabilizer link and disconnect the transverse arm from the steering knuckle.
2. Give fixture of the steering mechanism and separate it from a stretcher.
3. Remove the pendulum arm (back support) engine (see Section Removal and installation of the power unit) and a pipe support for the exhaust system.
4. Turn out a bolt of the top draft from outside a body.
5. Jack up the subframe and unscrew the bolts of its fastening. Remove the subframe together with the top link, wishbone and stabilizer bar.
6. Remove the top link, wishbone and stabilizer from the subframe.
7. Installation is carried out in the reverse order. Finally, check the wheel alignment.