Note. After removal, it is allowed to install only a new one, i.e. never connected to the on-board network, instrument cluster.
Assembling the instrument cluster
Lamps and instrument cluster connector
1. Disconnect the negative cable from the battery.
2. Remove the upper section of the instrument panel, steering column covers and instrument cluster bezel (see Section Removal and installation of the instrument panel and its components).
3. Turn out screws and extend a combination from the panel of devices.
4. Separate sockets of electroconducting and completely remove assembly of a combination of devices.
5. If necessary, separate the front cover and upper casing from the instrument cluster assembly (see illustration Assembling the instrument cluster).
6. If necessary, replace the instrument cluster lamps (see illustration Lamps and instrument cluster connector).