Note. Removal and installation of a combination of devices are described in Section instrument cluster.
Components for installing and fastening the instrument panel
1 - Front passenger airbag unit; 2 - Protection of the steering column; 3 - Upper section of the instrument panel; 4 - Instrument cluster; 5 - Fringing of a combination of devices; 6, 15 - Side trims of the instrument panel; 7 - Switch finishing panel; 8 - Lower trim section under the instrument cluster; 9, 16 - Side deflectors; 10 - Overlay of the instrument panel; 11 - Mounting block cover; 12 - Central overlay of the instrument panel; 13 - Audio block; 14 - Latch of the glove box cover; 17 - Glove box; 18 - Glove box cover; 19 - Gutter; 20 - Control unit finishing panel; K / V -; 21 - Steering column covers; 22 - Fringing of the ignition lock; 23 - Central cover of the instrument panel; 24 - Center console; 25 - Coin holder; 26 - Instrument panel; 27, 28 - Central deflectors
1. To remove, release the component from the latches, if necessary, having previously removed the adjacent trim components.
2. Removal and installation of deflectors of system of ventilation is described in the Chapter Engine cooling, heating, ventilation and air conditioning systems; Removal and installation of the block of a pillow of safety of the forward passenger is described in the Head Onboard electrical equipment.
3. Installation is carried out in the reverse order. Use new clamps and make sure that the panels are firmly attached to them.