Specifications
Type and volume of coolant | cm. Specifications |
A/C system coolant | HFC-134A (R-134a) |
Amount of refrigerant, g | 450÷500 |
Compressor oil K/V | Nissan A/C System Oil Type R or equivalent |
Thermostat opening temperature, deg | 86.5÷89.5 |
Thermostat valve stroke at 101 degrees, mm | at least 8 |
Thermostat closing temperature, deg | 83 |
Cooling system test pressure, atm | 1.57 |
Pressure held by the radiator cap of the cooling system, atm | |
| 0.78÷0.98 |
| 0.59 |
Compressor type K/V | Zexel Valeo Climate Control KC59G, rotary |
Tightening force of threaded connections, Nm
Expansion tank (models with manual transmission and K / V) | 3.8÷4.5 |
E/motor of the cooling fan | 3.0÷4.0 |
Central screw for fastening the impeller of the cooling fan | 1.7÷2.3 |
Water pump | 10.0÷13.7 |
Water pump pulley | 6.9÷9.5 |
suction tube | 16.6÷23.5 |
drain | 6.3÷8.3 |
heater tube | 29.4÷39.2 |
ECT sensor | 20÷27 |
Bolt of fastening of the K/V block | 6÷7.7 |
fasteners (nut and bolt) steering gear | 11÷13 |
Bolts for fastening low pressure hoses and high pressure pipes | 2.9÷5.9 |
Nuts of fastening of flexible hoses to the K/V compressor | 7.8÷19.6 |
Bolt of fastening of a flexible hose of a high pressure to the condenser | 7.8÷19.6 |
Bolt of fastening of a high pressure pipe to the condenser | 2.9÷5.9 |
Bolts of fastening of the compressor K/V | 16.6÷23.5 |
Refrigerant pressure sensor | 9.8÷11.7 |
Bolts of fastening of the bottom basic beam of a radiator | 43.4÷58.7 |
Upper dryer mounting bolts | 2.9÷3.8 |