2. Remove fan and shroud, all belts, pulleys and damper.
3. Remove the drive sprocket (photo).
11.3b... or with a puller, having previously displaced the sprocket and screwed the bolt into the hole on the crankshaft toe
4. Remove the belt washer.
5. Remove the seal (photo).
11.5 Removing the crankshaft oil seal
6. Lubricate the lips of the new oil seal with molybdenum grease (photo).
11.6 Lubricating the stuffing box
7. Carefully press in the oil seal using a tool that you can make yourself (photo).
11.7a Tool for pressing stuffing box
11.7b Pressing in the stuffing box
8. Lubricate the crankshaft toe, put on the washer, sprocket and pulleys.
9. Install all removed parts in reverse order. Adjust the tension of the belts, tighten the bolts to the specified torque.