Front bumper installation components
1 - Bumper pad; 2 - Bumper beam; 3/4 - Upper / lower bumper side bracket; 5 - Bumper bracket
Front spoiler bracket
1. Remove the grille (see Section Removal and installation of a decorative grille of a radiator).
2. Remove the bumper pad fasteners and lockers (see Section Removal and installation of the front fender and lockers).
3. Turn out bolts of fastening of an overlay of a bumper to a forward part of wings.
4. Pull the bumper cover horizontally away from the wings, unhook the clips and remove the cover.
5. Remove from an overlay of a bumper lateral brackets.
6. Turn out bolts and nuts and remove a beam of a bumper.
7. Turn out bolts and removal an arm of a bumper.
8. If necessary, remove the front spoiler by unscrewing its bolts from the inside of the bumper (see illustration).
9. Installation is carried out in the reverse order.