Air ducts and deflectors
1, 4 - Side deflectors; 2, 3 - Central deflectors; 5 - Assembling the instrument panel; 6, 10 - Side air ducts; 7, 9 - Air ducts for blowing side windows; 8 - Grille blowing the windshield
1. For removal central deflectors remove the center console cover (see chapter Body) and audio unit (see chapter Onboard electrical equipment), then release the deflector from the latches.
2. For removal of the grille and air ducts for blowing glass remove the upper trim of the instrument panel, unscrew the fixing screws and disconnect the grille and air ducts from the trim.
3. For removal central air ducts remove the center console cover (see chapter Body) and remove the screws.
Side deflectors
1. Remove the upper overlay of the instrument panel, the overlay of switches to the left of the steering column (see chapter Body).
2. To remove the right deflector, remove the glove box cover (see chapter Body).
3. Unhook the deflector clips and remove it.
Side air ducts
Fasteners for side air ducts
1. Remove the glove box cover (see chapter Body) and right air duct.
2. Remove the dashboard (see chapter Body) and BCM (see chapter Onboard electrical equipment).
3. Turn out bolts of fastening of the K/V block, bolts of the steering mechanism and a steering column. Release the wiring harness (see illustration Fixture of the K/V block).
4. Remove the steering gear and the left air duct (see illustration Fasteners for side air ducts).
Front air duct
1. Remove the glove box cover (see chapter Body).
2. Turn out screws and remove an air duct from outside the passenger.
3. Remove the cover under the steering column (see chapter Body).
4. Remove the screws, disconnect the evaporator temperature sensor connector and remove the left air duct.