1. Caliper bracket; 2. Guide pin; 3. Boot guide pin; 4. Shoe holder (upper); 5. Shoe holder (lower); 6. Inner lining; 7. Outer gasket; 8. Cylinder body; 9. Piston seal; 10. Piston; 11. Piston boot; 12. Connecting bolt; 13. Copper washer; 14. Bleeding port
Attention:
- To reduce the health hazard of dust particles or other materials, clean the caliper and brake pads with a vacuum cleaner. Do not use compressed air.
- When removing the cylinder body, do not press the brake pedal, otherwise the piston will pop out.
- It is not necessary to remove the bolts on the caliper bracket and brake hose, except for disassembly and replacement of the caliper assembly. In this case, hang the cylinder body on the wire so as not to stretch the brake hose.
- Do not damage the piston boot. Avoid getting brake fluid on the brake disc.