Description
The procedure is an accelerator pedal released position learning operation by monitoring the accelerator pedal position sensor output. This procedure must be performed each time the connector is disconnected from the accelerator pedal position sensor or the ECM.
Execution procedure
1. Make sure the accelerator pedal is fully released.
2. Turn the ignition key to position «ON» and wait at least 2 seconds.
3. Turn the ignition key to position «OFF» and wait at least 10 seconds.
4. Turn the ignition key to position «ON» and wait at least 2 seconds.
5. Turn the ignition key to position «OFF» and wait at least 10 seconds.