Table of contents: Description ↓ Procedure of execution ↓
Description
The procedure is a closed throttle position learning operation by monitoring the output signal of the throttle position sensor. It must be performed every time the connector is disconnected from the throttle actuator or ECM.
Procedure of execution
1. Make sure the accelerator pedal is fully released.
2. Turn the ignition key to the "ON" position.
3. Turn the ignition key to the "OFF" position and wait at least 10 seconds. Check by sound that the throttle valve moves within the specified 10 seconds.
See the source on the portal NISSANBOOK.RU