Table of contents: Front door ↓ Back door ↓
Front door
Front Door Lock Fastening Components
1 - Inner handle; 2 - Door lock button cable; 3/5 - Inner/outer handle cable; 4 - Holder; 6 - Assembling the lock; 7 - Lock cylinder rod; 8 - External handle bracket; 9 - External handle; 10 - Assembling the lock cylinder; 11/12 - Front/Rear Gasket; 13 - Plug
1. Remove the door trim panel (see section Removal and installation door trim panels) and raise the glass completely.
2. Remove the rear lower door glass guide (see section Removal and installation of glass and window lifters of side doors).
3. Remove the interior handle cable and the door lock button cable from the holder.
[The material is taken from a web resource NISSANBOOK.RU]
4. Remove the screws securing the inner handle and remove it from the door by sliding it backwards.
5. Disconnect the cables from the inner handle, remembering their position.
6. Remove the plug from the door and unscrew the bolt underneath it that secures the lock cylinder assembly (with appropriate equipment). Remove the lock cylinder rod.
7. On models with the system "Intelligent Key" disconnect the receiver's wiring connector and remove the wiring holder.
9. Pull the outside handle forward to remove the lock cylinder assembly.
10. Remove the outer handle by pulling it outward and towards the rear of the vehicle.
11. Remove the outer handle gaskets.
12. Unscrew the lock mounting bolts.
13. Slide the outer handle bracket towards the rear of the vehicle and remove the bracket and lock assembly.
14. Disconnect the lock assembly connector.
15. Disconnect the cable from the outer handle bracket.
16. Installation is carried out in reverse order.
Back door
Rear Door Lock Mounting Components
1 - Inner handle; 2 - Door lock button cable; 3/4 - Inner/outer handle cable; 5 - Assembling the lock; 6 - External handle bracket; 7 - External handle; 8 - External handle panel; 9/10 - Front/Rear Gasket; 11 - Plug
1. Remove the door trim panel (see section Removal and installation door trim panels) and the fixed door glass guide (see section Removal and installation of glass and window lifters of side doors).
2. Hold the door glass and raise it fully.
3. Remove the screws securing the inner handle and remove it from the door by sliding it backwards.
4. Disconnect the cables from the inner handle, remembering their position.
5. Remove the plug from the door and unscrew the bolt underneath it that secures the outer handle panel.
6. Pull the outer handle forward to remove its panel.
7. Remove the outer handle by pulling it outward and towards the rear of the vehicle.
8. Remove the outer handle gaskets.
9. Remove the lock mounting bolts.
10. Slide the outer handle bracket towards the rear of the vehicle and remove the bracket and lock assembly.
11. Disconnect the lock assembly connector.
12. Disconnect the cable from the outer handle bracket.
13. Installation is carried out in reverse order.