1. Gear lever handle; 2. Gear lever; 3. Control mechanism; 4. Cable selection before; 5. Gearshift cable; 6. Clutch housing; 7. Bracket 1 cables; 8. Bracket 2 cables (only for HR16DE engine); A. Black; B. White
Removing
1. Remove the central console and a cover of the gear lever. See chapter Body.
2. Unscrew the mounting bolts of the control mechanism.
3. While pressing the cable end release button, disconnect the cable from both gear levers.
4. Raise the cable and remove it from the cable bracket 1.
5. Remove the center muffler and heat shield. See chapter Accelerator, fuel system and exhaust system.
6. Remove bracket 2 cables from vehicle (only for HR16DE engine).
7. Release the latches at the front and rear of the control mechanism. Remove the control gear and cable from the vehicle.
Note: If the shift knob needs to be removed, pull it out and remove.
Installation
Installation is carried out in the reverse order of removal, taking into account the following:
When installing, insert the end of the cable into both gear levers.
After reassembly, check that the gear selector automatically returns to neutral when moved to 1st, 2nd and reverse.
After installation, make sure that the lever switches properly in all positions.
When installing the gear lever handle, fit it onto the lever.