Designed to turn the adaptive cruise control system on and off.
SET/COAST switch
Designed to set the required speed.
This switch cannot reduce the set travel speed.
ACCEL/RES switch
After disabling cruise control, it restores the speed set before canceling.
Increases the set movement speed.
Disable button
Disables cruise control.
Distance setting button
Sets three types of distance (large, medium, small).
Cruise control devices
The instrument panel has an adaptive cruise control system display and a cruise control indicator.
Cruise control indicator
This indicator informs that the main switch is in the ON position.
Cruise control malfunction indicator
This indicator informs about a malfunction of the adaptive cruise control system.
Adaptive cruise control display
The display shows the presence or absence of the vehicle in front, the set distance and the set speed.
After the ignition key is turned to the ON position, the lamp test is carried out and the display will show the image shown in the figure. After starting the engine, the image goes out.
Installation
1. Turn on the main switch by pressing the button. The cruise control indicator on the instrument panel will illuminate and the display will show the set distance and set speed. The system goes into setup standby mode.
2. Accelerate or slow down the vehicle to the desired speed.
3. Press the SET/COAST switch.
The system will set the speed at which the car is moving at the moment the button is pressed.
The display will show the presence or absence of a vehicle in front and the set speed. The car will move with the parameters set above.
Attention: When you are not using the cruise control, turn it off using the main switch. Otherwise, if you mistakenly press the switches on the steering wheel, the cruise control will turn on, which may lead to unforeseen consequences.
Note:
If you turn off the engine, the main switch will turn off automatically.
After starting the engine, a large distance is set. Setting the middle or short distance is done by operating the corresponding switch.