The front seats are heated by built-in heating elements The two buttons Ⓐ and Ⓑ located on the center console are used to switch the front seat heaters on and off independently.
1. Turn on the ignition. The seat heaters only work when the ignition key is in the ON position.
2. Start the engine. Turning on the seat heater with the engine off will quickly drain the battery.
3. Depending on the temperature conditions, press (low heat/ ①) or (high heat/ ②). At the same time as the seat heater is switched on, the indicator light ③ integrated in the button lights up.
The seat heater is controlled by a thermostat that automatically turns the heating element on and off to maintain the set temperature. At the same time, the indicator built into the key is constantly on until the key is returned to the center position.
4. After warming up the seat to a comfortable temperature or before leaving the car in the parking lot, be sure to turn off the seat heaters.