Table of contents: Removal ↓ Installation ↓
Removal
1. Drain the brake fluid See section "Draining and filling".
2. Remove the brake shoes from the rear wheel drum brake.
3. Disconnect the brake pipe from the working cylinder.
4. Loosen the slave cylinder mounting bolts and remove it from the mud shield.
Installation
Installation is carried out in the reverse order of removal. Tighten all components to the specified torque. See section "Components".
Fill with fresh brake fluid and bleed air. See section "Bleeding the brake system".
The original can be read on the website (www.NissanBook.ru)