- It is very important not to scratch the gasket mounting surfaces of any aluminum parts.
- Using a suitable tool, remove the remnants of the old gasket from the metal surface.
- Apply the solvent to the parts to be cleaned, wait about 10 minutes, then remove it with a wooden spatula. The operation must be performed with protective gloves.
- Do not allow solvent to come into contact with paint surfaces.
- Take extra care when cleaning to prevent foreign particles from entering the oil passages for supplying oil to the camshaft (channels in the cylinder head and in its cover), as well as in return oil lines. Failure to do so may cause clogging of the oil grooves, resulting in rapid and severe engine damage.