Installation
Installation is carried out in the reverse order of removal, taking into account the following.
Do not allow oil to get on the insulators and do not damage them.
If installation direction is specified, install the parts according to the top and front marks printed on them, referring to the figure at the beginning of this section.
The front insulator is attached to the central beam at the location indicated by the letter «TO» (4WD models).
The mounting bolts are tightened starting from the left engine mount (from the gearbox side).
Examination
Before starting the engine, check the level of coolant, engine oil, fluid in the power steering. If their quantity is not enough, top up to the required level.
Start the engine and check for unusual noise or vibration.
Warm up the engine to operating temperature and check for coolant, engine oil, power steering fluid, fuel and exhaust leaks.