Preparatory work
Remove the intercooler.
Remove the engine cover.
Removal and installation of a valvate cover
Removing
Loosen the set screws in the reverse order of the illustration.
Attention: Do not remove the damper installed on top. If for any reason you have removed the damper, apply Three Bond 244B Locking Sealant to the mounting bolts and bolt holes when installing.
Installation
Tighten the set bolts in the order shown in the figure.
Retighten the set bolts in the order shown in the illustration to the correct torque.
Valve cover installation (sealant application)
Apply a bead of Three Bond 1207C (KR510 00150) with a diameter of 3.0 mm on the areas shown in the figure.